new products

• 

  Offset Punch and Die Set / bending tools

  Also known as Z bends or Joggles, the Offset punch and die set is able to make two bends at the same time. This is the solution for applications requiring materials to be joined together or when you need to make a second bend that will not interfere with the first bend.

• 

  85° punch/top-tool end pieces with movable horn extensions - 1 pair / bending tools

  Advantages ▶ Easy and quick bending of boxes ▶ Easy removal of the finished profile ▶ Compatible with punches/top tools ▶ Individual production possible

• 

  Hinge Tools / bending tools

  Advantages Production in two or three strokes Reducing of marks through spring loaded hold-down-device Active components are hardened High repeatability through integrated backgauge Functional test and adjustment through test bends - with your sample sheets Suitable For Material thickness up to 4,0 mm minimum inside Ø: 2,5 mm x material thickness for steel and aluminium 3,0 mm x material thickness for stainless steel

• 

  Closed profile punch / bending tools

  Tonnage 150 kN/m max. Material 42Cr: 900-1150 N/mm2 Advantages - Bending of closed profiles can be produced - Large Channel Profiles can be produced - Easy Removal - Individual Production

• 

  WingBend tools without scratch

  Press brake rolla-v dies without scratch, it's best to put the film on the workpiece surface when you bend. and we will recoomend the suitable roll-v die size for you according to the plate you bend.

• 

  Shim Style Adjustable Dies System/ bending tools

  Shim Style Adjustable Dies Adjustable lower dies could be considered to be one of the most versatile additions to a press brake. With this type of tool, openings can be arranged from 6.35mm to 381mm. Spacers are provided to produce the required opening. Slotted spacers allow for easy removal to change the die opening. When not in use, spacers are positioned at sides of the die block. These dies can be furnished in solid lengths or sectioned for easier handling.

• 

  Amada Special Tools Press Brake Tool

  The stright blade size:835*146*26mm,90degree. the material is 42CrMo4, hardness is HRC47+/-3

• 

  Amada bending thick board tool press brake tool

  The stright blade size:835*175*40mm,60degree. the material is 42CrMo4, hardness is HRC47+/-3

• 

  42CrMo4 material press brake upper tools

  The stright blade size:835*146*26mm,90degree. the material is 42CrMo4, hardness is HRC47+/-3

• 

  Amada Special Tools press brake tool

  The Amada press brake tooling straight blade size:835*145*32mm,60degree. the material is 42CrMo4, hardness is HRC47+/-3

all new products